Ten Best Budget Audiophile Ready Hi-Fi Lossless Hi-RES USB-C Digital Music Players in 2025

Pricing on Amazon.CO.UK1

Pricing on Amazon.CO.UK2

(1)

HiFi Walker H2

1.5D x 5.4W x 9H cm

10h with Headphones

70mW/32Ohms

1300 mA/h

152 g

ES9018K2M

BT 5.2

aptX

DSD128

64GB

(2)

Oilsky HiFi MP3 Player

3.14 × 2.16 × 0.55 inches

15h with Headphones or BT

1450mA/h

134 g

ESS9018Q2M

BT 4.1

WiFi

DSD512

in 16GB, Basic 64GB, up to 1TB

(3)

HiFi Walker H2 Touch

1.4D x 6.2W x 8.5H cm

10h with Headphones or BT

1500 mA/h

130 g

ES9218

BT 5.2

aptX

DSD128

Basic 64GB, up to 512GB

(4)

Hidizs AP80 PRO-X

1.38 x 5.45 x 6.12 cm

6-8h BAL

8-11h PO

800mA/h

72 g

Dual ESS9219C

BT 4.2

aptX

DSD256

MQA 8X

Basic 64GB, up to 512GB

(5)

HiBy R1 HiFi

83.5 x 51.1 x 12.35mm

15h

with BT or Headphones

SE-3.5mm

max 101mW /32Ohms

1150 mA/h

70 g

USB-C OTG

SoC

X1600E

DAC

CS43131

BT 5.1

DSD256

Basic 32GB,

Micro SD up to 2TB

Pricing on Amazon.com

Pricing on AliExpress.com

(6)

SHANLING M0 Pro

4.38 x 4.5 x 1.38cm

14.5h

90 mW /32Ohms

650mA/h

36.8 g

Dual

ESS ES9219C

BT 5.0

DSD128

Micro SD, up to 2TB

Pricing on Amazon.com

Pricing on AliExpress.com

(7)

HIFI WALKER H20 Pro

4.27 x 2.09 x 0.55 inch

10h with Headphones

3.5mm PO 112 mW /32Ohms

4.4mm Bal 380mW /32Ohms

1500mA/h

USB-DAC

SPDIF

Dual

ESS ES9219

BT 5.1

aptX

Dual Band Wifi

DSD256

Basic 128GB, up to 512GB

Pricing on Amazon.com

Pricing on AliExpress.com

(8)

HiBy R3 II

86.9 x 60.6 x 14.5mm

16h

112mW/32Ohms

340mW/32Ohms

2000 mA/h

118 g

USB DAC

Dual

ES9219C

BT 5.1

aptX

and

2.4GHZ

Wifi

DSD256

Micro SD, up to 2TB

(9)

HiBy R3 PRO II

86.9 x 60.6 x 21.6mm

21h

4000mAh

160 g

Dual

CS43198

Four OPA1622 OP Amps

BT 5.1

and

2.4GHZ

Wifi

DSD256

Micro SD, up to 2TB

1.) FANVACE HiFi / MECHEN M33 DAP – HiFi Hi-RES Digital Audio Player,

(10)

Table 1. FANVACE HiFi / MECHEN M33 vs HIFI WALKER H2 vs

Oilsky HiFi vs HIFI WALKER H2 Touch vs Hidizs AP80 PRO-X vs HiBy R1 vs

SHANLING M0 Pro vs HIFI WALKER H20 Pro vs HiBy R3 II vs HiBy R3 PRO II

Topic – Content:

2.) HiFi WALKER H2 DAP – Hi-RES Digital Audio Player,

3.) Oilsky HiFi DAP – Hi-RES Digital Audio Player,

4.) HiFi WALKER H2 Touch DAP – Hi-Res Digital Audio Player,

5.) Hidizs AP80 PRO-X DAP – HiFi Hi-RES Digital Audio Player,

6.) HiBy R1 DAP – HiFi Hi-RES Digital Audio Player,

7.) SHANLING M0 Pro DAP – HiFi Hi-RES Digital Audio Player,

8.) HiFi WALKER H20 Pro DAP – Hi-RES Digital Audio Player,

9.) HiBy R3 II DAP – HiFi Hi-RES Digital Audio Player,

10.) HiBy R3 PRO II DAP – HiFi Hi-RES Digital Audio Player,

Link to Cross-Reference TABLE 1.

1/10 FANVACE HiFi / MECHEN M33 DAP

PIC 1. FANVACE HiFi / MECHEN M33

1. FANVACE HiFi / MECHEN M33 DAP – Key Features:

DAC ESS ES9018K2M
DSD256 digital decoding
More stable and higher quality Bluetooth 5.3
Recommended Item

Solid Metallic Body,
2.8-inch Color TFT full-touch LCD Display (240 x 320 pixels),
Rechargeable Li-Ion battery, 3.7V, 2000mA/h, 3,4 hours for full charge.
Wireless Bluetooth 5.3 Transmission (A2DP profile)
Hardware DAC:
- DAC TYPE: ESS ES9018K2M
- LOW Power using Hardware,
Memory Options:
- System comes with preinstalled 64GB or 128GB, depending on bundle, the user can update the micro SD card up to 256GB
- The Memory Space is Limited to 256GB or approximately 300 full albums in FLAC format.
Supported Audio File Format:
- MP3 8-48kHz, 16 bits,
- AAC 8-96kHz, 16 bits,
- FLAC 8-192kHz 16,24bits,
- APE 8-192kHz 16, 24bits,
- WAV/PCM 8-192kHz 8, 16, 24, 32 bits,
- WMA 8-96kHz 16, 24bits,
- AIFF 8-192kHz 8, 16, 24, 32bits,
- ALAC 8-192kHz 16, 24bits,
- IMA/MS-ADPCM 8-48kHz 8, 16bits,
- DSF 2822.4kHz 1bit,
- DFF 3072kHz 1bit,
- OGG 8-48kHz 10-500bits.
Single Full Charge ensures Playback Duration approx 50h, depending on the sampling rate and the type of media file:
Connectors:
- MicroSD Card Slot – Up to 256GB Size,
- Flexible output functions – Headphones and AUX Cable,
- 3.5mm jack for Headphones x1,
- 3.5mm jack for Line Audio Out x1,
- USB-C slot for charging,
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 2000mA/h
Battery Charging:
- Using USB-C input,
THD+N: <0.001%
SNR: 127dB@1KHz, ± 2dB
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm jack,
Dimensions:
- 3.36 x 2.56 x 0.6 inches
Weight:
- 167 g.

2/10 HIFI WALKER H2 DAP

PIC 2. HiFi WALKER H2

2. HIFI WALKER H2 DAP – Key Features:

Distinctive ALPS scroll control wheel
2-way Bluetooth 5.2 with wireless HD audio support
Qualcomm aptX technology
Recommended Item

High-grade Zinc Alloy Shell, CNC molded,
2.0-inch TFT Color LCD screen ( 320 x 240 ),
Rechargeable Li-Ion battery, 3.7V, 1300mA/h, 2 hours for full charge.
Bi-Directional Wireless Bluetooth 5.2 Transmission – Supporting Qualcomm® aptXTM,
Hardware DAC:
- DAC ESS ES9018Q2M
- LOW Power using Hardware,
Memory Options:
- The user can choose from a basic microSD card with 64GB of Space,
- The Memory Space is Limited to 1ТB or approximately 1200 full albums in FLAC format,
Supported Audio File Format:
- MP3 48kHz/16bit,
- WAV 192kHz/64 bit,
- WMA 192kHz/24bit,
- AIF 384kHz/32bit,
- APE 192kHz/24bit,
- AAC 48kHz/16bit,
- DFF 2.8MHz/1bit DSD,
- DSF 2.8MHz/1bit DSD,
- FLAC 192kHz/24bit,
- OGG 48kHz/16bit
Single full charge playback duration depends on the sampling rate and the type of media file:
- DSD128 (5.6MHz) – up to 10 hours,
- DSD64 (2.8MHz) – up to 10 hours,
Connectors:
- MicroSD Card Slot – Up to 1TB Size is supported for now x 1,
- 3.5mm jack for Headphones x 1,
- 3.5mm Jack for Line Audio Out x 1,
- USB-C slot for charging x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 1300mA/h
Battery Charging:
- Using USB-C Input,
THD: <0.008%
SNR: 107dB@1KHz, ±3dB
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm jack,
Dimensions:
- 1.5D x 5.4W x 9H cm
Weight:
- 152 g.

3/10 Oilsky HiFi DAP

PIC 3. Oilsky HiFi

3. Oilsky HiFi DAP – Key Features:

Android-based DAP with hardware DAC & AMP, DSD512 Support
Up to DSD512 HiRES Audio Support
WiFi Connectivity and Bi-Directional Wireless Bluetooth V4.1 Transmission
Best Ratio Functionality /Price, Recommended Item

2.8-inch LCD Color Display, 480 x 640 pixels,
Rechargeable Li-Ion battery, 3.7V, 1450mA/h, 2 hours for full charge.
Bi-Directional Wireless Bluetooth V4.1 Transmission – LDAC, SBC, and AAC high-quality lossless transmission,
Hardware:
- DAC Type: ES9018Q2M,
- AMP Type: MAX97720,
- MTK 8-Core Processor/2GB RAM,
- LOW Power using Hardware,
Memory Options:
- The user can choose from a basic microSD card with 64GB of Space,
- The Memory Space is Limited to 1ТB or approximately 1200 full albums in FLAC format,
Supported Audio File Format:
- Audio Formats: MP3, WAV, APE, FLAC, AAC, ALAC, DSF, DFF, ISO, DTS
- Supported Specs: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176kHz, /16bit / 24bit,
Supported Video File Format:
- Video Formats: AVI, MKV, RMVB, MOV, MPG, MP4,
Single full charge playback duration depends on the sampling rate and the type of media file:
- DSD512 – up to 15 hours,
- DSD256 – up to 15 hours,
Connectors:
- MicroSD Card Slot – Up to 1TB x 1,
- 3.5mm jack for Headphones x 1,
- USB-C slot for USB Access and charging x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V,
- Capacity: 1450mA/h
Battery Charging:
- Using USB-C Input,
THD: % N.A. Information
SNR: dB@1KHz N.A. Information
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω,
Power Output:
- 28mW/32 Ohms, ( 0.95V@32 Ohms ),
- 6mW @600 Ohms, ( 1.9V @ 600 Ohms ).
Headphone Port:
- 3.5mm jack,
Dimensions:
- 3.14 × 2.16 × 0.55 inches
Weight:
- 134 g.

4/10 HIFI WALKER H2 Touch DAP

PIC 4. HIFI WALKER H2 Touch

4.) HIFI WALKER H2 Touch DAP – Key Features:

DAC ESS ES9218, DSD128 (2.8MHz)
DMIC up to 48 kHz – HiFi Stereo Digital Voice recording
Bi-Directional Wireless Bluetooth V 5.2 Transmission with aptX Support
Recommended Item

Solid CNC Molded Zinc-Alloy Shell,
2.4-inch TFT Touch Color Display, 480 x 360 pixels,
Rechargeable Li-Ion battery, 3.7V, 1500mA/h, 2 hours for full charge.
Bi-Directional Wireless Bluetooth V 5.2 Transmission – Supporting Qualcomm® aptXTM,
Hardware DAC:
- DAC Type: ESS ES9218,
- USB DAC,
- LOW Power using Hardware,
Memory Options:
- The user can choose from a basic microSD card with 64GB of Space,
- The Memory Space is Limited to 1ТB or approximately 1200 full albums in FLAC format,
- Support USB-C – OTG, using OTG Cable,
Supported Audio File Format:
- FLAC, APE, DFF, MP3, WAV, WMA, M4A, MP2, AAC (M4A), ALAC, OGG, AIFF.
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD128 – up to 10 hours,
Connectors:
- MicroSD Card Slot – Up to 256GB Size is supported for now x 1,
- 3.5mm jack for Headphones x 1,
- 3.5mm Jack for Line Audio Out x 1,
- USB-C slot for charging and USB Access x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 1500mA/h
Battery Charging:
- Using USB-C Input,
THD: <0.005 %
SNR: 116 dB@1KHz, ± 2dB
Mastering Level audio frequency 24bit/384 kHz,
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm jack,
Dimensions:
- 1.4D x 6.2W x 8.5H cm
Weight:
- 130 g.

5/10 Hidizs AP80 PRO-X DAP – HiFi Hi-RES Digital Audio Player,

PIC 5. Hidizs AP80 PRO-X

5. Hidizs AP80 PRO-X DAP – Key Features:

Perfect for a wearable MP3 player
Dual ESS9219C
Only 72 g Weight
Certified by Hi-Res Audio & Hi-Res Audio Wireless, Recommended Item

Solid, one-piece CNC-molded aluminium shell,
2.45-inch IPS touch full-color Display by Samsung, ( 480 x 360pixels ),
Rechargeable Li-Ion battery, 3.7V, 800mA/h, 1 hour for full charge,
Wireless Bluetooth V4.2 Transmission – Supporting Qualcomm® aptXTM.
Hardware DAC:
- DUAL DACs Type: ESS ES9219C,
- LOW Power using Hardware.
Memory Options:
- The user can choose from a basic microSD card with 64GB of Space,
- The Memory Space is Limited to 512GB or approximately 600 full albums in FLAC format.
Supported Audio File Format:
- MP3 38kHz/320kbps,
- WAV 84kHz/32bit,
- WMA 384kHz/32bit,
- AAC 48kHz/320kbps,
- APE 96kHz/24bit,
- AIFF 384kHz/32bit,
- FLAC 384kHz/32bit,
- OGG 48kHz/16bit,
- DSF/DFF (11.2MHz/1bit), DSD256,
- DSF/DFF| (5.6MHz/1bit), DSD128,
- DSF/DFF (2.8MHz/1bit), DSD64,
- MQA 352.8kHz/24bit, (8x unfolding).
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD256 – up to 9 hours,
Connectors:
- MicroSD Card Slot – Up to 512GB Size x 1,
- 3.5mm jack for SE Output to Headphones x 1,
- 2.5mm Jack Balanced Output for Line Audio Out x 1,
- USB-C slot for charging x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 800mA/h
Battery Charging:
- Using USB-C Input,
THD+N: 0.0015%,
SNR: -114dB @1KHz, ± 2dB,
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω
Headphone Port:
- 3.5mm jack
Dimensions:
- 1.38 x 5.45 x 6.12 cm
Weight:
- 72 g.

6/10 HiBy R1 DAP

PIC 6. HiBy R1

6. HiBy R1 DAP – Key Features:

DAC CS43131, DSD256
SoC: X1600E, SD Bluetooth V5.1 LDAC with aptX support
SE Power Output 101mW / 32 Ohms
Standby time: 400h tested by HiBy Labs
Up to 2TB Storage with microSD Card
OTA updates supported, Recommended Item

Polycarbonate chassis with glass back,
3-inch IPS touch-screen Color Display ( 800 x 480pixels ),
Rechargeable Li-Ion battery, 3.7V, 1150mA/h, 1.5-2 hours for full charge,
Single-Directional Wireless Bluetooth V5.1 transmission with aptX support,
WiFi support, OTA firmware updates, WiFi music transfer, TIDAL and Qobuz streaming,
Hardware DAC:
- DAC Type: CS43131
- LOW Power using Hardware,
Memory Options:
- The user can choose from a basic microSD card with 32GB of Space,
- The Memory Space is Limited to 2TB or approximately 2400 full albums in FLAC format.
- USB-C OTG support, using a special cable.
Supported Audio File Format:
- DSD256 native，
- PCM384kHz/32bit,
- MP3, WAV, APE, FLAC, DSF, DIFF, ISO, CUE, WMA.
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD256 – up to 15 hours,
Connectors:
- MicroSD Card Slot – Up to 256GB Size is supported for now x 1,
- 3.5mm jack for Headphones x 1,
- USB-C slot for Charging and USB-C OTG Access x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 1150mA/h
Battery Charging:
- Using USB-C Input,
Dynamic Range: 122dB,
Output Power:
- 70mW (Low Gain),
- 101mW (High Gain).
Noise Level: 1.3uV
THD: 0.001%
Frequency Response Range:
- 20Hz-20KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm jack,
Dimensions:
- 83.5 x 51.1 x 12.35mm
Weight:
- 70 g.

7/10 SHANLING M0 Pro DAP

PIC 7. SHANLING M0 Pro

7. SHANLING M0 Pro DAP – Key Features:

Perfect for a wearable MP3 player
DSD technology and APT-X Bluetooth V4.0
Clip for easy attaching to clothes
Super lightweight- only 36.8 g
Recommended Item

Small body with a clip accessory,
1.54-inch Color LCD touch-sensitive display ( 240 x 240 pixels),
Rechargeable Li-Ion battery, 3.7V, 650mA/h, 1 hour for full charge,
Bi-Directional Wireless Bluetooth V5.0 Transmission – Supporting Qualcomm® aptXTM,
Hardware DAC:
- DAC Type: Dual ESS ES9219 chips,
- LOW Power using Hardware,
Memory Options:
- The user can choose from a microSD card and,
- The Memory Space is limited to 2TB or approximately 2400 full albums in FLAC format.
Supported Audio File Format:
- Transmit: LDAC, APTX, AAC, SBC
- Receive: LDAC, SBC, AAC
- Supported rate: 384 kHz/32 bit
- DSD128 (2.8MHz), supports: ISO, DSF, DFF
- MP3, WMA, WAV, DTS, AIF, DXD, APE, FLAC, ALAC
- AAC, OGG, M4A, AC3, CUE, M3U
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD128 – up to 14 hours,
- DSD 64 – up to 15 hours,
- MP3 – up to15 hours,
Connectors:
- MicroSD Card Slot – Up to 2TB Storage Space x 1,
- 3.5mm jack for SE Headphones x 1,
- 4.4mm jack for BAL output x 1,
- USB-C slot for Charging and USB Access x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 650mA/h
Battery Charging:
- USB-C Input,
SE Output:
- THD+N: <0.001 %
- SNR: 118dB@1KHz, ± 2dB
- Channel Separation: 72dB
- 90mW/32 Ohms
BAL Output:
- THD+N: <0.001%
- SNR: 119dB@1KHz, ± 2dB
- Channel Separation: Approx. 85 dB
- 236mW/32 Ohms
Frequency Response Range:
- 20Hz-40KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm jack,
Dimensions:
- 43.8 × 45 × 13.8mm
Weight:
- 36.8 g.

8/10 HIFI WALKER H20 Pro DAP

PIC 8. HIFI WALKER H20 Pro

8. HIFI WALKER H20 Pro DAP – Key Features:

Powerful Dual ESS ES9219 chips,
DSD256 technology and Bluetooth V5.1 with aptX
Remarkable Dynamic Range of more than 115dB
USB-C OTG Support
E-Book Reader Background Music, Recommended Item

Solid, all-aluminium-alloy construction,
3.2-Inch LCD Color Display, ( 360 x 640pixels),
Rechargeable Li-Ion battery, 3.7V, 1500mA/h, 2 hours for full charge,
Bi-Directional Wireless Bluetooth V5.1 Transmission – Supporting Qualcomm® aptXTM,
Hardware DAC:
- DAC Type: Dual ESS ES9219 chips,
- LOW Power using Hardware,
Memory Options:
- The user can choose from a microSD card and,
- The Memory Space is at the moment Limited to 512GB or approximately 600 full albums in FLAC format,
- USB-C OTG Support, using a special, non-included cable in the bundle,
Supported Audio File Format:
- APE 192kHz/24bit,
- FLAC 192kHz/24bit,
- WAV 384kHz/24bit,
- WMA 192kHz/24bit,
- DSF 11.28MHz/1bit,
- DFF 11.28MHz/1bit,
- WMALossless 96kHz/24bit,
- MP3, MP2, OGG, AAC, AIFF, M4A.
Single fully charged playback duration depends on the sampling rate and the type of media file:
- DSD256 – up to 10 hours,
Connectors:
- MicroSD Card Slot – Up to 512GB Size is supported for now x 1,
- 3.5mm jack for PE Headphones x 1,
- 4.4mm jack for BAL Headphones x 1,
- USB-C slot for Charging, USB Access, and SPDIF Connection x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 1500mA/h
Battery Charging:
- Using USB-C Input,
THD: <0.005%,
Dynamic Range >115dB,
SNR: 118dB@1KHz, ± 2dB,
Frequency Response Range:
- 20Hz-40KHz,
Nominal Impedance:
- 8 to 150 Ω,
Headphone Ports:
- 3.5mm jack,
- 4.4mm jack,
Dimensions:
- 4.27 x 2.09 x 0.55 inch,
Weight:
- 144 g.

9/10 HiBy R3 II DAP

PIC 9. Hiby R3 II

9. HiBy R3 II DAP – Key Features:

Dual ES9219C top-tier DAC
Dual independent Audio Clocks: 45.1584MHz, 49.152MHz
2.4GHz WiFi & Bluetooth 5.1 with aptX support
USB-DAC Functionality, SPDIF USB port output
USB-C OTG Support, OTA Firmware upgrade
Recommended Item

Hard metallic chassis. The front and back plates are made of reinforced glass. It gives a solid and premium feel.
3.2-inch touch-sensitive color display (320 x 480 pixels)
Rechargeable Li-Ion battery, 3.7V, 2000mA/h, 2 hours for full charge,
Bluetooth V5.1 Transmission – Supporting Qualcomm® aptXTM, UAT, LDAC, AAC, SBC.
Hardware DAC:
- DAC Type: Dual ESS ES9219C chips,
- LOW Power using Hardware,
- USB DAC Functionality,
- SPDIF USB port output.
Memory Options:
- The Memory Space in a microSD card is currently limited to 2TB, or approximately 2,400 full albums in FLAC format,
- Flash Cart needs to be formatted or be compatible with exFAT or NTFS format,
- USB-C OTG Option, using a special cable.
Supported Audio File Format:
- Compressed: MP3, WMA, AAC, OGG, Opus,
- Lossless: FLAC, APE, AIFF, ALAC (Apple Lossless), WAV,
  High-Resolution: Native DSD up to DSD256, PCM up to 32-bit/384kHz,
  Other: MQA up to 16x unfold, ISO, CUE
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD256 – up to 15 hours,
Connectors:
- MicroSD Card Slot – Up to 2TB Memory Space x 1,
- 3.5mm jack for PE Headphones x 1,
- 4.4mm jack for BAL Headphones and Line Audio Out x 1,
- USB-C slot for Charging and USB OTG Access x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 2000mA/h
Battery Charging:
- Using USB-C Input,
THD: <0.0007%
SNR: 119dB@1KHz, ± 2dB
Frequency Response Range:
- 20Hz-90KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm PE Output jack,
  - max 112mW/32 Ohms,
  - ChannelSeparation 65 dB,
- 4.4mm BAL Output jack,
  - max 340mW/32 Ohms,
  - Channel Separation 110 dB.
Dimensions:
- 86.9 x 60.6 x 14.5mm
Weight:
- 118 g.

Pricing on Amazon..

10/10 HiBy R3 PRO II DAP

PIC 10. HiBy R3 PRO II

10. HiBy R3 PRO II DAP – Key Features:

Dual DACs CS43198, Four OPAmps OPA1622
Low Phase-Noise Xal-Oscillators:
- 45.1584 MHz and 49.152 MHz
MSEB Tunning Board, Wifi Music Transfer
Huge battery capacity of 4000mA/h
21h Playback, 900+ hours in Stand-By Mode
Hi-Res & Hi-Res Wireless certified
Recommended Item

Solid Metallic Body,
3.3-inch IPS high-accuracy touch-sensitive color display (720 x 480pixels)
Rechargeable Li-Ion battery, 3.7V, 4000mA/h, 3,4 hours for full charge,
Single-Directional Wireless Bluetooth V5.1 Transmission, UAT, LDAC – Supporting Qualcomm® aptXTM, compatible with AAC and SBC protocols
To cut the dramatic impact of phase jitter, Hiby’s hardware engineers have implemented two high-stability low-phase xtal-oscillators – 45.1584MHz and 49.152MHz
Wireless audio capability: AirPlay, DLNA, HiByLink
Hi-Res & Hi-Res Wireless certified

Hardware DAC:
- DAC Type: CS43198 chip x 2
- Output Amplifiers Type: OP Amps OPA1622 chip x 4
  - SoundPlus(tm),
  - High-Fidelity Audio amplifiers,
  - LOW Power using Hardware
- New, Upgraded SoC Type: X1600E

Memory Options:
- No built-in memory in the DAP itself. The user can choose from a microSD card and,
- The Memory Space is limited to a 2TB-sized microSD Card, or approximately 2400 full albums in FLAC format.
Supported Audio File Format:
- FLAC, DSD, MQA, APE, AAC, WAV, MP3, OGG, ALAC, MP2, MP1, AIFF, LPCM, PCM, RAW, M4A, AMR,
  High-Resolution: Native DSD up to DSD256, PCM up to 384kHz/32bit,
  Other: MQA up to 8x unfold, ISO, CUE
Single Charge Playback Duration depends on the sampling rate and the type of media file:
- DSD256(5.6MHz) – up to 21 hours, PCM384kHz/32bit、MQA 8X
Connectors:
- MicroSD Card Slot – Up to 256GB Size is supported for now x 1,
- 3.5mm jack for PE Headphones x 1,
- 4.4mm jack for BAL Headphones Output x 1,
- USB-C slot for Charging, USB Audio in/out, Coaxial SPDIF Output via Adapter x 1.
Battery:
- Type: Li-ion Battery,
- Nominal Voltage: 3.7V
- Capacity: 4000mA/h
Battery Charging:
- Using USB-C Input,
THD: <0.0006%
SNR: 119dB@1KHz, ± 2dB
Frequency Response Range:
- 20Hz-90KHz
Nominal Impedance:
- 8 to 150 Ω,
Headphone Port:
- 3.5mm PE Output jack,
- 4.4mm BAL Output jack,
  - max 480mW/32 Ohms,
Dimensions:
- 86.9 x 60.6 x 21.6mm
Weight:
- 160 g.