KEYSIGHT N9952A - FieldFox Handheld Microwave Analyzer, 50 GHz

FieldFox Handheld Microwave Analyzer, 50 GHz

PIC. 1 N9952A Handheld Microwave Analyzer, 50 GHz

Key Features and Functions

50 GHz max frequency
Carry industry’s first 50 GHz handheld µW analyzer: standard model includes cable and antenna analyzer
Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
Save time by measuring DTF and TDR in a single sweep
Simultaneously measure all four S-parameters
Make accurate SA measurements (± 0.5 dB) without needing warm-up
Easily measure average and pulse power with a USB sensor
Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)

Warranty upgradeable up to 10 years
Calibration and Repair: 3 levels of service
Assurance Plans: up to 10 years of protection

Technical Specifications

Frequency	5 kHz to 50 GHz
Frequency Options	50 GHz
Maximum Analysis Bandwidth	n/a
Bandwidth Options	n/a
Maximum Real-Time Bandwidth	n/a
Real-Time Bandwidth Options	n/a
DANL @1 GHz	-159 dBm
Phase Noise @1 GHz (10 kHz offset)	-111 dBc/Hz
Phase Noise @1 GHz (30 kHz offset)	-110 dBc/Hz
Phase Noise @1 GHz (1 MHz offset)	-113 dBc/Hz
Overall Amplitude Accuracy	±0.5 dB
TOI @1 GHz (3rd Order Intercept)	+13 dBm
Maximum Dynamic Range 3rd Order @1 GHz	n/a
Instrument Type	Combination Analyzer
Applications-General Purpose	AM/FM Tune and Listen Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response
Applications-Cellular	n/a
Applications-Wireless Connectivity	n/a
Applications-Digital Video	n/a
Performance Level	◆◆◆◇◇◇
Standard Attenuator Range	30 dB
Standard Attenuator Step	5 dB
Spur Free Dynamic Range	n/a
Multi-Domain Bandwidth	n/a
DANL @2 GHz, No Preamplifier	n/a
DANL @10 GHz, No Preamplifier	n/a
System Features	Built-In DC Source GPS Receiver – Internal and External
Power Measurement Using USB Sensor	CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor
Output Power	4 dBm
Trace Noise	0.004 dBrms
Number of Built-In Ports	2 ports
Cable and Antenna Analyzer	Yes
Spectrum Analyzer	Yes
Vector Network Analyzer	Yes
CAT/VNA Start Frequency	300 kHz
SA Start Frequency	5 kHz
Additional CAT/VNA Based Features	Vector Voltmeter Mixed-Mode S-Parameters TDR Cable Measurements
Additional SA Based Features	Built-In Power Meter Extended Range Transmission Analysis (ERTA)
Maximum Frequency	50 GHz
Dynamic Range	100 dB
Applications Available	Yes
Applications	S-Parameters Distance-To-Fault Cable Trimming Return Loss Insertion Loss/Gain Interference Analysis Power Measurements
Components	Cables Antennas Amplifiers Filters 75 Ohm CATV Devices
Best Speed at 201 Point, 1 Sweep	180 ms
Handheld	Yes