DSO203: 4-Channel Oscilloscope with Color LCD Display
DSO203 is a smart functional, good-looking, portable with pocket size, 5-trace, 4 channels, Digital Storage Oscilloscope – DSO.
DSO203 Oscilloscope – Overview
This digital oscilloscope device can be used for different hobby, professional activities or common electronic engineering tasks. Its management MCU is ARM Cortex-M3 based. Internal USB disk with 8MB size, enables DSO users to store and call different DSO waveforms and raster images to the screen, and also to upgrade the latest available device firmware versions.
Hardware design uses a receiving FPGA Integral circuit, manages the control and buffering of data streams to the high quality, 72-MSamples per seconds input ADC. Inside the device is integrated 8M USB disc, suitable for any custom user information – for example to firmware update and to store and call the users waveforms on the screen.
User information is divided into 4 application related zones, connected with 4 different kinds of firmware application data.
PIC. 1 Digital Storage Oscilloscope DSO203
DSO203 Main Features:
- Body: Compact body design for comfortable portable use.
- Display: 400 x 240 pixels, Color TFT LCD display.
- Built-in 8MB storage disc for storing waveforms, update data and other raster images.
- Channels Description: 4-channels with 8 MHz bandwidth per channel, 1MΩ input impedance, 72M Samples per second.
- Modes [Synchronous]: Auto, Normal, Single, Scan, None.
- Battery: Integrated Rechargeable Li-Ion battery – 1000mA/ h.
- Charging source: Device using the USB interface for charging.
- Trigger Options: Rising or falling edge trigger, positive or negative pulse width trigger.
- Auto type measurement:
- Frequency,
- Duty cycle,
- Cycle time,
- DC RMS voltage,
- Vpp,
- Vmax,
- Vmin,
- Vavg.
- Mathematics type waveforms:
- [CH_A] + [CH_B],
- [CH_A] – [CH_B],
- [CH_C] | [CH_D],
- [CH_C] & [CH_D],
- RecA,
- RecB,
- RecC,
- RecD.
- Signal Source Type 1: Integrated signal generator [ 10Hz – 8MHz ] square wave with an adjustable duty-cycle.
- Signal Source Type 2: Functional wave generator [10Hz – 20KHz ] Sine, Square, Triangle or Sawtooth wave.
PIC. 2 View inside the device enclosure – see PCB’s Top Layer – Color Display Side
PIC. 3 View inside the device enclosure – see PCB’s Bottom Layer – MCU, ADC, Input FPGA, buttons, and sliders Side
Firmware Upgrade zone: Check on the link below the manufacturer site for the latest firmware updates related DSO203 Oscilloscope.
PIC. 4 Professional type Probes – 2pcs.
DSO203 Oscilloscope – Technical Data:
Display Type / Technology:
- Full Color TFT LCD Display
Display Resolution:
- 400 x 240 pixels
Case Type:
- Plastic Case
ADC Type:
- Analog Devices AD9288 , 8-Bit, 40, 80, 100 MS/S
Coupling:
- AC / DC
CPU Type / Version:
- ARM / Cortex M3
FIFO & Control:
- FPGA
Analog Bandwidth:
- 8MHz
Maximal Sample Rate:
- 72MSa/s
Analog Input Impedance:
- 1MΩ
Memory Buffer Stack Size:
- Single channel – 8K,
- Four channels – 4 x 4K
2 – Analog Type Channels:
- [CH_A], [CH_B]
2 – Digital Type Channels:
- [CH_C], [CH_D]
Max. Input Voltage Amplitude:
- 80Vpp (X1 probe);
- 400Vpp (X10 probe)
Vertical Sensitivity:
- 50mV – 10V/div (1-2-5 steps) – x1 probe;
- 200mV – 100V/div (1-2-5 steps) – x10 probe
Horizontal Sensitivity:
- 0.1uS/Div ~ 2S/Div (1-2-5 steps)
Power Supply:
- Built-in 1 A/h Li-Ion Rechargeable Battery
Charging method:
- via USB Interface
Operating Temperature:
- 0~50°C
Storage Temperature:
- -20~60°C
Device Dimensions:
- 99 x 59 x 13mm
- 3.9 x 2.3 x 0.5in
Device Weight:
- 92 gr.
- 3.24 oz
Package dimensions:
- 18 x 10 x 5.5 cm
- 7.1 x 3.94 x 2.2 inches
Package Weight:
- 325 gr.
- 11.5 oz
See the Package:
- DSO203 – Digital Storage Oscilloscope – 1pcs.
- Professional type Probes – 2pcs.
- Mini USB Cable – 1pcs.
- User Manual (in English) – 1pcs.
- Software Unlocking Hex Key – 1pcs.
- Transporting Bag – 1pcs.
VIDEO 1. Oscilloscope DSO203 – Trigger Tutorial
TOMTOP.COM Affiliate Link: Oscilloscope DSO203
AMAZON.CO.UK Affiliate Link: SaintSmart DSO203 Smart Oscilloscope
