KEYSIGHT N9952A – FieldFox Handheld Microwave Analyzer, 50 GHz


 FieldFox Handheld Microwave Analyzer, 50 GHz


PIC. 1    N9952A   Handheld Microwave Analyzer, 50 GHz

Key Features and Functions

  • 50 GHz max frequency
  • Carry industry’s first 50 GHz handheld µW analyzer: standard model includes cable and antenna analyzer
  • Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
  • Save time by measuring DTF and TDR in a single sweep
  • Simultaneously measure all four S-parameters
  • Make accurate SA measurements (± 0.5 dB) without needing warm-up
  • Easily measure average and pulse power with a USB sensor
  • Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)
  • Warranty Plans
    Warranty upgradeable up to 10 years
  • Calibration Plans
    Calibration and Repair: 3 levels of service
  • Assurance Plans
    Assurance Plans: up to 10 years of protection


Technical  Specifications

Frequency 5 kHz to 50 GHz
Frequency Options 50 GHz
Maximum Analysis Bandwidth n/a
Bandwidth Options n/a
Maximum Real-Time Bandwidth n/a
Real-Time Bandwidth Options n/a
DANL @1 GHz -159 dBm
Phase Noise @1 GHz (10 kHz offset) -111 dBc/Hz
Phase Noise @1 GHz (30 kHz offset) -110 dBc/Hz
Phase Noise @1 GHz (1 MHz offset) -113 dBc/Hz
Overall Amplitude Accuracy ±0.5 dB
TOI @1 GHz (3rd Order Intercept) +13 dBm
Maximum Dynamic Range 3rd Order @1 GHz n/a
Instrument Type Combination Analyzer
Applications-General Purpose
  • AM/FM Tune and Listen
  • Field Strength Measurement
  • SCPI Code Compatibility
  • Spectrogram
  • Stimulus Response
Applications-Cellular n/a
Applications-Wireless Connectivity n/a
Applications-Digital Video n/a
Performance Level ◆◆◆◇◇◇
Standard Attenuator Range 30 dB
Standard Attenuator Step 5 dB
Spur Free Dynamic Range n/a
Multi-Domain Bandwidth n/a
DANL @2 GHz, No Preamplifier n/a
DANL @10 GHz, No Preamplifier n/a
System Features
  • Built-In DC Source
  • GPS Receiver – Internal and External
Power Measurement Using USB Sensor
  • CW or Swept-Frequency
  • Frequency-Offset
  • RF Pulse Test with Peak Sensor
Output Power 4 dBm
Trace Noise 0.004 dBrms
Number of Built-In Ports 2 ports
Cable and Antenna Analyzer Yes
Spectrum Analyzer Yes
Vector Network Analyzer Yes
CAT/VNA Start Frequency 300 kHz
SA Start Frequency 5 kHz
Additional CAT/VNA Based Features
  • Vector Voltmeter
  • Mixed-Mode S-Parameters
  • TDR Cable Measurements
Additional SA Based Features
  • Built-In Power Meter
  • Extended Range Transmission Analysis (ERTA)
Maximum Frequency 50 GHz
Dynamic Range 100 dB
Applications Available Yes
  • S-Parameters
  • Distance-To-Fault
  • Cable Trimming
  • Return Loss
  • Insertion Loss/Gain
  • Interference Analysis
  • Power Measurements
  • Cables
  • Antennas
  • Amplifiers
  • Filters
  • 75 Ohm CATV Devices
Best Speed at 201 Point, 1 Sweep 180 ms
Handheld Yes


Related Videos:

VIDEO 1.Learn about FieldFox Handheld Analyzers


VIDEO 2.Cable and Antenna Test


VIDEO 3.Vector network analysis


VIDEO 4.Spectrum Analysis   


VIDEO 5.Interference Analysis


Data Sheet and Key Documents

To view all: Document Library




Amazon Gift Ideas  Affiliate Link

Amazon Hot New Releases  Affiliate Link

Amazon Best Sellers  Affiliate Link


Leave a Reply