Sorensen Programmable DC Power Supply
XBT32-3FTP
PIC. 1
Key Features
- Fully programmable 3rd output 15V/5A/30W
- High resolution, 16-bit programming and readback
- Isolated, tracking, parallel or series operation
- 100-hour timer • USB and RS-232 Standard
- IEEE488.2 and Ethernet control Optional
Sorensen XBT Series
0 – 222W True 16-bit triple output digital bench top power supply. Channels 1 and 2 can be programmed
0-32V and 0-3A each. The third output is fully programmable 0-15V, 0-5A up to a maximum of 30W.
PIC. 2
Product Overview
The Sorensen XBT32-3FTP adds to the capability of the Sorensen bench top product line with a 16-bit triple output supply. Channels 1 and 2 can be programmed 0-32V and 0-3A each. The third output is fully programmable 0-15V, 0-5A up to a maximum of 30W. Channels 1 and 2 can be configured for tracking, a parallel or series operation to, in effect, provide the equivalent of 6 different power supplies. In isolated mode, each of the 3 outputs functions independently; in tracking mode, channels 1 and 2 provide the same, but isolated output; in parallel mode, there is one 0-32V/0-6A output and one 0-15V/0-5A/30W output; in series mode, there is one 0-64V/0-3A output and one 0-15V/0-5A/30W output.
Safety of devices under test is paramount. The Sorensen XBT series of power supplies provides superior device protection. Each output is fully isolated with voltage/current preview before turning on the output. Built-in switches, in addition to enabling the preview mode, can configure the outputs for parallel or series connection while graphics on the front panel show the user where to make connections.
PIC. 3
Advanced engineering features include storage of 100 different setups (voltage and current) as well as a 100-hour timer. Power- on state and synchronous or individual control of each channel output can also be set. Over-voltage and over-current protection are programmed for each channel.
Computer control is easily accomplished through industry-standard SCPI commands via the USB or RS-232C interfaces which come standard on every unit. The GPIB / Ethernet interface option allows 3 low power channels in a half-rack for ATE applications. This option also includes an 8-bit digital I/O which can be set as input or output signals for programming.
Product Specifications
| Output Ratings | ||
| Channels 1 and 2 | Channel 3 | |
| Voltage (VDC) | 0-32 | 0-15 |
| Current (ADC) | 0-3 | 0-5 |
| Power (W) | 96 | 30 |
| Output Performance | ||
| Voltage Setting and Readback | ||
| Accuracy | 0.01% + 5mV | 0.01% + 5mV |
| Amplitude Resolution | 1mV | 1mV |
| Current Setting and Readback | ||
| Accuracy | 0.1% + 3mA | 0.1% + 3mA |
| Resolution | 100 µA | 100 µA |
| Voltage Ripple | 0.5 mVRMS | 1mVRMS |
| Voltage Noise | 5 mVpp | 20mVpp |
| Current Ripple | 1mA | 5mARMS |
| Load Regulation | ||
| Voltage | 0.01% + 2mV | 5mV |
| Current | 0.01% + 300 µA | 0.01% + 300 µA |
| Line Regulation | ||
| Voltage | 0.01% + 2mV | 0.01% + 2mV |
| Current | 0.01% + 300 µA | 0.01% + 300 µA |
| Stability | 8 hours, constant load and temperature | |
| Voltage | 0.02% + 2mV | 0.02% + 2mV |
| Current | 0.01% + 1mA | 0.01% + 1mA |
| Temperature Coefficient (per C) | ||
| Voltage | 0.01% + 3mV | 0.01% + 3mV |
| Current | 0.02% + 2mA | 0.02% + 2mA |
| Transient Response | 50µS | 50µS |
| Voltage Programming Time (typical) | ||
| Rise Time (Full Load) | 1ms | 3ms |
| Rise Time (No Load) | 1ms | 3ms |
| Fall Time (Full Load) | 3ms | 8ms |
| Fall Time (No Load) | 250ms | 250ms |
| Common | ||
| Memory Storage | 100 setups | 100 setups |
| Timer | 1 second | 100 hours |
| Regulatory Compliance | cETLus (ANSI/UL61010-1-04, CAN/CSA C22.2 No. 61010-1-04) Compliant to CE Mark LVD EN61010-1, EMC EN61326 | |
| AC Input | 115 / 230 VAC 10%, 47-63Hz | |
| Operating Temperature | 0 to 40 C | |
| Storage Temperature | -10 to +70 C | |
| Weight | 14.3 lbs. / 6.5 kgs | |
| Size | WxHxD 8.5×5.3×17 in / 216x135x432 mm | |
| Options and Accessories | ||
| M139 | IEEE488.2 and Ethernet control interfaces | |
| MHV | Setup for 230V 10% AC Input | |
| RM-XBT | Rack mount kit for XBT Series power supplies | |
TABLE 1
Material: Ametek
