PNDT012 – 12 A Digital Pico SlimLynx TM Open Frame: Non – Isolated DC – DC Modules 3 Vd c – 14.4Vdc input; 0.45Vdc to 5.5Vdc output; 12 A Output Current

   PNDT012 – 12 A  Digital Pico SlimLynx TM Open Frame: Non – Isolated DC – DC  Modules

   3 VDC  – 14.4VDC input; 0.45VDC to 5.5VDC output; 12A Output Current


RoHS Compliant

12.2 mm x 12.2 mm x 2.9 mm


PNDT012 – 12A Digital Pico SlimLynx TM Open Frame: Non – Isolated DC-DC Modules 3 Vdc – 14.4Vdc input; 0.45Vdc to 5.5Vdc output; 12 A Output Current


  • Compliant to RoHS II EU “Directive 2011/65/EU”
  • Compliant to REACH Directive (EC) No 1907/2006
  • Compliant to IPC – 9592 (September 2008), Category 2,
  • Class II
  • Ultra low height design for very dense power applications.
  • Small size:  12.2 mm x 12.2 mm x 2.9 mm (Max)                               (0.48 in x 0.48 in x 0.116 in)
  • Output voltage programmable from 0.6Vdc to 5.5Vdc via external resistor. Digitally adjustable down to 0.45Vdc
  • Wide Input voltage range (3Vdc-14.4Vdc)
  • Wide operating temperature range [-40°C to85°C]. See derating curves
  • DOSA approved footprint
  • Digital interface through the PMBus TM#protocol
  • Tunable LoopTM to optimize dynamic output voltage response
  • Flexible output voltage sequencing EZ-SEQUENCE
  • Power Good signal
  • Remote On/Off
  • Fixed switching frequency with capability of external synchronization
  • Output over-current protection (non-latching)
  • Over-temperature protection
  • Ability to sink and source current
  • Compatible in a Pb-free or SnPb reflow environment
  • UL* 60950-1 Recognized, CSA  C22.2 No. 60950-1-03 Certified, and VDE 0805:2001 – 12 (EN60950 -1) Licensed
  • ISO** 9001 and ISO 14001 certified manufacturing facilities
  • Distributed power architectures
  • Intermediate bus voltage applications
  • Telecommunications equipment
  • Servers and storage applications
  • Networking equipment
  • Industrial equipment
Description The 12A Digital Pico SlimLynxTM :  Open Frame power modules are non – isolated dc – dc converters that can deliver up to 12A of output current. These modules operate over a wide range of input voltage (V IN = 3Vdc – 14.4Vdc) and provide a precisely regulated output voltage from 0.45Vdc to 5.5Vdc, programmable via an external resistor and PMBus control. Features include a digital interface using the PMBus protocol, remote On/Off, adjustable output voltage, over current and over temperature protection. The PMBus interface supports a range of commands to both control and monitor the module. The module also includes the Tunable Loop TM feature that allows the user to optimize the dynamic response of the  converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area.

Characteristic curves-Hardware-Pro



Example Circuit-Hardware-Pro

Additional links:

GE Slimlynx selector   GE – Imagination at Work

PNDT012 Module info

Here you can see and capsuled version of the module.

{Material: GE Industrial  PNDT012}



Amazon Gift Ideas  Affiliate Link

Amazon Hot New Releases  Affiliate Link

Amazon Best Sellers  Affiliate Link


Leave a Reply